Benning EV 3-2 test adapter

• The coding for charging cables is simulated via a rotary selector switch:
• No cable: ∞ Ω
• 13 A cable: 1500 Ω
• 20 A cable: 680 Ω
• 32 A cable: 220 Ω
• 64 A cable: 100 Ω
• Input voltage:
• 1-phase: up to 250 V, 50 Hz 60 Hz
• 3-phase: up to 430 V, 50 Hz 60 Hz
• Maximum test current: 40 A (10 ms) periodic operation
• BNC connector, resistor:
• BNC housing > PE: 100 kΩ
• BNC contact > PE: 100 kΩ
• Phase voltage display via LEDs
• Testing of EV charging stations even with a permanently connected charging cable
• Test socket and 4 mm jacks for easy connection to an installation test device
• Separate phase indicator via three LEDs for easy voltage check
• Proximity Pilot (PP) checks the coding of the charging cables for charging current limiting.
• Control Pilot (CP) simulates vehicle status A, B, C, D and E (short circuit between CPPE)
• BNC connector for CP signal output for verification with an oscilloscope
• EVSE locking system check from status B (charging cable release is blocked)

Application:

• The BENNING EV 32 measuring adapter enables safety and functional tests to be carried out on certain charging stations for electric vehicles in accordance with DIN VDE 0100-600 (IEC 60364-6) and DIN VDE 0105-100 (EN 50110) using the BENNING IT200 installation test device.
• The BENNING EV 32 is designed for testing charging stations in accordance with DIN EN / IEC 61851-1 (VDE 0122-1) of the charging mode “Mode 3” and has a Type 2 connector in accordance with IEC / EN 62196
• The BENNING EV 32 establishes a secure contact with the BENNING installation test device and triggers the charging process of the charging station by simulating an electric vehicle.
• Scope of delivery:
• Measuring adapter
• Protective case