GEDORE 179-piece tool set

consisting of:

• 1/4" 2-point reversible ratchet, 129 mm
• 1/4" square drive handle: 140 mm
• 1/4" socket wrench insert, external hexagon: SW 4/4.5/5/5.5/6/7/8/9/10/11/13
• 1/4" socket wrench extension: 97 mm
• 1/4" cross handle: 115 mm
• 1/4" universal joint: 38 mm
• 1/2" 2-way reversible ratchet, 270 mm
• 1/2" socket wrench insert, external hexagon: SW 8/10/11/12/13/14/15/16/17/18/19/21/22/23/24/26/27/28/30/32
• 1/2" socket wrench insert, internal hexagon: 5/6/7/8/9/10/12/14/17
• 1/2" socket wrench extensions: 125, 250 mm
• 1/2" universal joint: 72 mm
• 1/2" cross handle: 292 mm
• 1/2" screwdriver: 123 mm
• 5/16" Bit Slot: 5.5/6.5/8/12
• 5/16" Hex Bit: 4/5/6/8/10
• 5/16" Bit Phillips: PH2/PH3/PH4
• 5/16" bit inner Torx®: T27/T30/T40/T45
• 5/16" connection part for bits: 5/16" 6kt x 1/2" 4kt + 5/16" 6kt x 1/4" 4kt
• Double ring wrench, offset: SW 6x7/8x9/10x11/12x13/14x15/16x17/18x19/20x22/21x23/24x27/25x28/30x32
• Double open-end wrench: SW 6x7/8x9/10x11/12x13/14x15/16x17/18x19/20x22/21x23/24x27/25x28/30x32
• Angle screwdriver, internal hexagon: SW 2/2.5/3/4/5/6/8/10
• Adjustable wrench 8": 205 mm
• Key file set, 6 pieces
• Slotted screwdrivers: 3/4/5.5/6.5/8/10
• Slotted screwdriver, short: 6.5
• Phillips screwdrivers: PH1/PH2/PH3
• Phillips screwdriver, abbreviated: PH1/PH2
• Pozidriv screwdrivers: PZ1/PZ2
• Locksmith's hammer: 500 g
• Grains: ø 4mm x 120 mm
• Drift punch: ø 3 x 120 mm / ø 5 x 120 mm
• Flat chisel: 12 x 125 mm / 16 x 150 mm / 22 x 200 mm
• Cross chisel: 125 mm
• Pin punch, length 150 mm: ø 2/3/4/5/6/8 mm
• Universal pliers: 256 mm
• Power combination pliers: 180 mm
• Flat-nose pliers: 160 mm
• Flat-nose pliers, angled: 160 mm
• Power side cutters: 160 mm
• Power front cutter: 160 mm
• Pipe wrench 1 1/2": 430 mm
• Grip pliers: 260 mm
• External circlip pliers, type A: 1025 mm/1960 mm
• External retaining ring pliers, type B: 1025 mm/1960 mm
• Internal retaining ring pliers, type C: 1225 mm/1960 mm
• Internal retaining ring pliers, type D: 1225 mm/1960 mm
• Thread file, thread pitch 0.8/1.0/1.25/1.5/1.75/2.0/2.5/3 mm: 230 mm
• Roller head lever: 400 mm
• PUK® saw: 290 mm
• Bow saw
• Flexible magnetic lifter: 520 mm
• Triangular hollow scraper: 200 mm
• Caliper: 213 mm
• Scribing needle: 250 mm
• Cable length: 195 mm
• Measuring tape: 3 m
• Screw extractor set: M3-M45
• Soft-faced hammer, recoil-free: 800 g
• Workshop file, flat: 200 mm
• Workshop file, triangular: 200 mm
• Workshop file, round: 200 mm
• Workshop file, semi-circular: 200 mm
• Ideal scissors, right-cutting: 260 mm
• Square awl: 100 m
• Oil spray can 300 ml